Assembly Guide

Most TEXEBIKE models arrive partially assembled. Basic assembly may be required before your first ride.

This guide provides general assembly information. Always follow the specific manual included with your e-bike.

Before You Start

Prepare a clean, safe workspace. Carefully remove the e-bike from the box and keep all packaging until assembly and inspection are complete.

Check that all parts are included:

If any part is missing or damaged, contact TEXEBIKE before riding.

Align the handlebar properly with the front wheel. Tighten all bolts evenly and securely.

Make sure brake cables and wires are not twisted, stretched, or pinched.

Place the front wheel into the fork correctly. Secure the axle or quick-release mechanism according to the manual.

Check that the wheel spins freely and does not rub heavily against the brake.

Pedals are side-specific.

Do not force the pedal threads. Cross-threading can damage the crank arm.

Insert the seat post to the correct height. Do not raise it above the minimum insertion line.

Tighten the clamp securely before riding.

Make sure the battery is properly seated and locked into place. Check that the battery connection is secure before powering on the bike.

Squeeze both brake levers before riding. The brakes should feel firm and responsive.

Do not ride if the brakes feel loose, weak, noisy, or misaligned.

Inflate tires according to the recommended pressure shown on the tire sidewall or product manual.

Improper tire pressure can affect range, comfort, handling, and safety.

Turn on the display and check:

Before every ride, check:

For your first ride:

Do not ride if:

For assembly questions, please contact TEXEBIKE through the Contact Us page on texbike.com